Talk:Quarter Windows

From Bondline
Revision as of 23:09, 10 March 2007 by Bob Steward (talk | contribs)

Bob.. any hints on a clearance dimension for the quarter windows?

I was thinking of at least 1/8 inch (perhaps 3/16?) at 70F before the rubber foam from Fletchair is applied. thanks ....gil A

Not sure I understand your clearance question. Clearance from WHAT? Around the outside edge from the aluminum angles that are bonded to the fuselage?

I've never had any issues with the clearance around the quarter windows.

--Bob

Retrieved from "https://bondline.org/index.php?title=Talk:Quarter_Windows&oldid=2338"