Instrumentation

DRAFT NEW PAGE - gil Alexander Installation of Mitchell Instrument STC gauge package.

Items needed but not supplied 1. #8 ring terminals with 1/4 inch hole (instructions say to just use existing wiring, but my plane - 77 Tiger - used 3/16 terminals on the power wing to the old ammeter) 2. New hoses to senders - I used new AN-4 firesleeved hoses - 10.5 inches for fuel pressure and 18 inches for oil pressure - but 16 inch would probably be better - see later pics. 3. Clamps to mount the senders, 5/8 for the engine mount side and 1 9/16 for the senders. Instructions call for all clamps to be MSxxxx