https://bondline.org/index.php?action=history&feed=atom&title=Whelen_Strobe_install_inside_the_Red_Rudder_CapWhelen Strobe install inside the Red Rudder Cap - Revision history2026-11-11T02:58:15ZRevision history for this page on the wikiMediaWiki 1.46.2https://bondline.org/index.php?title=Whelen_Strobe_install_inside_the_Red_Rudder_Cap&diff=2996&oldid=prevHortonjf at 20:02, 25 January 20092009-01-25T20:02:04Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw-interface="">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 20:02, 25 January 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l4">Line 4:</td>
<td colspan="2" class="diff-lineno">Line 4:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Whelen parts:</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Whelen parts:</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Model A 625 strobe light assembly (current part number "[http://www.whelen.com/aviation/catalog/Light%20Heads.pdf A625 strobe]").</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Model A 625 strobe light assembly (current part number "[http://www.whelen.com/aviation/catalog/Light%20Heads.pdf A625 strobe]").</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Model HTS,CF strobe power supply (new part #<del style="font-weight: bold; text-decoration: none;">A490A,TS,CF-14/28</del>)"[http://www.whelen.com/aviation/catalog/Power%20Supplies.pdf strobe power supply]".</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Model HTS,CF strobe power supply (new part #<ins style="font-weight: bold; text-decoration: none;">A490ATSC</ins>)"[http://www.whelen.com/aviation/catalog/Power%20Supplies.pdf strobe power supply]".</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Model HS-5 Whelen installation kit/wiring harness.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Model HS-5 Whelen installation kit/wiring harness.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<!-- diff cache key sbw_bondline:diff:1.41:old-2995:rev-2996:php=table -->
</table>Hortonjfhttps://bondline.org/index.php?title=Whelen_Strobe_install_inside_the_Red_Rudder_Cap&diff=2995&oldid=prevHortonjf at 02:59, 22 January 20092009-01-22T02:59:13Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw-interface="">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 02:59, 22 January 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l14">Line 14:</td>
<td colspan="2" class="diff-lineno">Line 14:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>I attached the power supply below the vertical in the area where the original flasher power supply was located. The Whelen power supply does not have any legs or standoffs attached to it. The area where I wanted to mount it is not flat, it has a raised lip from the lightening hole. So I made some spacers to support the power supply yet raise it high enough to clear the lip and then bolted it down.[[Image:strobe6.jpg|left|thumbnail|Aluminum spacers to raise and support the power supply.]] I used the original power supply for the flasher to power the Whelen unit so no wires were run forward, just a new harness from the power supply to the strobe that come from Whelen. The red rudder cap has its own STC and Whelen has an STC to cover the strobe and power supply install.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>I attached the power supply below the vertical in the area where the original flasher power supply was located. The Whelen power supply does not have any legs or standoffs attached to it. The area where I wanted to mount it is not flat, it has a raised lip from the lightening hole. So I made some spacers to support the power supply yet raise it high enough to clear the lip and then bolted it down.[[Image:strobe6.jpg|left|thumbnail|Aluminum spacers to raise and support the power supply.]] I used the original power supply for the flasher to power the Whelen unit so no wires were run forward, just a new harness from the power supply to the strobe that come from Whelen. The red rudder cap has its own STC and Whelen has an STC to cover the strobe and power supply install. <ins style="font-weight: bold; text-decoration: none;">"[http://www.whelen.com/pb/Aviation/Anti-Collision_Light_Systems_Installation_and_Service_Manual.pdf Whelen power supply, strobes, installation instructions and STC's]"</ins></div></td></tr>
<!-- diff cache key sbw_bondline:diff:1.41:old-2994:rev-2995:php=table -->
</table>Hortonjfhttps://bondline.org/index.php?title=Whelen_Strobe_install_inside_the_Red_Rudder_Cap&diff=2994&oldid=prevHortonjf at 02:44, 22 January 20092009-01-22T02:44:34Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw-interface="">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 02:44, 22 January 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l3">Line 3:</td>
<td colspan="2" class="diff-lineno">Line 3:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Whelen parts:</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Whelen parts:</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Model A 625 strobe light assembly (current part number).</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Model A 625 strobe light assembly (current part number <ins style="font-weight: bold; text-decoration: none;">"[http://www.whelen.com/aviation/catalog/Light%20Heads.pdf A625 strobe]"</ins>).</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Model HTS,CF strobe power supply (new part #A490A,TS,CF-14/28).</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Model HTS,CF strobe power supply (new part #A490A,TS,CF-14/28)<ins style="font-weight: bold; text-decoration: none;">"[http://www.whelen.com/aviation/catalog/Power%20Supplies.pdf strobe power supply]"</ins>.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Model HS-5 Whelen installation kit/wiring harness.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Model HS-5 Whelen installation kit/wiring harness.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<!-- diff cache key sbw_bondline:diff:1.41:old-2993:rev-2994:php=table -->
</table>Hortonjfhttps://bondline.org/index.php?title=Whelen_Strobe_install_inside_the_Red_Rudder_Cap&diff=2993&oldid=prevHortonjf at 02:35, 22 January 20092009-01-22T02:35:02Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw-interface="">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 02:35, 22 January 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l3">Line 3:</td>
<td colspan="2" class="diff-lineno">Line 3:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Whelen parts:</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Whelen parts:</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Model A 625 strobe light assembly.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Model A 625 strobe light assembly <ins style="font-weight: bold; text-decoration: none;">(current part number)</ins>.</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Model HTS,CF strobe power supply.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Model HTS,CF strobe power supply <ins style="font-weight: bold; text-decoration: none;">(new part #A490A,TS,CF-14/28)</ins>.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Model HS-5 Whelen installation kit/wiring harness.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Model HS-5 Whelen installation kit/wiring harness.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<!-- diff cache key sbw_bondline:diff:1.41:old-2992:rev-2993:php=table -->
</table>Hortonjfhttps://bondline.org/index.php?title=Whelen_Strobe_install_inside_the_Red_Rudder_Cap&diff=2992&oldid=prevHortonjf at 18:11, 21 January 20092009-01-21T18:11:40Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw-interface="">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 18:11, 21 January 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l14">Line 14:</td>
<td colspan="2" class="diff-lineno">Line 14:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>I attached the power supply below the vertical in the area where the original flasher power supply was located. The Whelen power supply does not have any legs or standoffs attached to it. The area where I wanted to mount it is not flat, it has a raised lip from the lightening hole. So I made some spacers to support the power supply yet raise it high enough to clear the lip and then bolted it down.[[Image:strobe6.jpg|left|thumbnail|Aluminum spacers to raise and support the power supply.]] I used the original power supply for the flasher to power the Whelen unit so no wires were run forward, just a new harness from the power supply to the strobe that come from Whelen.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>I attached the power supply below the vertical in the area where the original flasher power supply was located. The Whelen power supply does not have any legs or standoffs attached to it. The area where I wanted to mount it is not flat, it has a raised lip from the lightening hole. So I made some spacers to support the power supply yet raise it high enough to clear the lip and then bolted it down.[[Image:strobe6.jpg|left|thumbnail|Aluminum spacers to raise and support the power supply.]] I used the original power supply for the flasher to power the Whelen unit so no wires were run forward, just a new harness from the power supply to the strobe that come from Whelen<ins style="font-weight: bold; text-decoration: none;">. The red rudder cap has its own STC and Whelen has an STC to cover the strobe and power supply install</ins>.</div></td></tr>
<!-- diff cache key sbw_bondline:diff:1.41:old-2989:rev-2992:php=table -->
</table>Hortonjfhttps://bondline.org/index.php?title=Whelen_Strobe_install_inside_the_Red_Rudder_Cap&diff=2989&oldid=prevHortonjf at 18:03, 21 January 20092009-01-21T18:03:28Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw-interface="">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 18:03, 21 January 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l14">Line 14:</td>
<td colspan="2" class="diff-lineno">Line 14:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>I attached the power supply below the vertical in the area where the original flasher power supply was located. The Whelen power supply does not have any legs or standoffs attached to it. The area where I wanted to mount it is not flat, it has a raised lip from the lightening hole. So I made some spacers to support the power supply yet raise it high enough to clear the lip and then bolted it down.[[Image:strobe6.jpg|left|thumbnail|Aluminum spacers to raise and support the power supply.]] <del style="font-weight: bold; text-decoration: none;"> </del>I used the original power supply for the flasher to power the Whelen unit so no wires were run forward, just a new harness from the power supply to the strobe that come from Whelen.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>I attached the power supply below the vertical in the area where the original flasher power supply was located. The Whelen power supply does not have any legs or standoffs attached to it. The area where I wanted to mount it is not flat, it has a raised lip from the lightening hole. So I made some spacers to support the power supply yet raise it high enough to clear the lip and then bolted it down.[[Image:strobe6.jpg|left|thumbnail|Aluminum spacers to raise and support the power supply.]] <ins style="font-weight: bold; text-decoration: none;"> </ins>I used the original power supply for the flasher to power the Whelen unit so no wires were run forward, just a new harness from the power supply to the strobe that come from Whelen.</div></td></tr>
<!-- diff cache key sbw_bondline:diff:1.41:old-2988:rev-2989:php=table -->
</table>Hortonjfhttps://bondline.org/index.php?title=Whelen_Strobe_install_inside_the_Red_Rudder_Cap&diff=2988&oldid=prevHortonjf at 18:02, 21 January 20092009-01-21T18:02:32Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw-interface="">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 18:02, 21 January 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l11">Line 11:</td>
<td colspan="2" class="diff-lineno">Line 11:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A bracket to mount the A 625 light will have to be fabricated as well as the HTS,CF power supply. I used the dimensions outlined on the sketch to make the bracket. As indicated a slot will have to be cut on the rear side of the bracket to allow the wiring harness to pass through. </div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A bracket to mount the A 625 light will have to be fabricated as well as the HTS,CF power supply. I used the dimensions outlined on the sketch to make the bracket. As indicated a slot will have to be cut on the rear side of the bracket to allow the wiring harness to pass through. </div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Additionally a light shield is fabricated and attached to the bracket to shield the strobe light from flashing forward and distracting the pilot. The bracket is attached to the rudder horn and the wires routed.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Additionally a light shield is fabricated and attached to the bracket to shield the strobe light from flashing forward and distracting the pilot. The bracket is attached to the rudder horn and the wires routed.</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[Image:strobe2.jpg|left|thumbnail|]] [[Image:strobe3.jpg|right|thumbnail|Strobe with light shield.]]To rebalance the rudder I removed the original lead weight and fabricated a larger one that would still bolt into the existing location. This was done by making a mold out of aluminum foil and placing it in a large coffee can filled with sand to support the foil. I then melted the original lead and additional fishing weights in another can using a propane torch and poured it into my mold. I used more lead than I calculated cause its easier to cut it off then add it. I also had to drill two holes in it. The actual weight adjustment to just add the strobe vs standard light is not much. I used most of the additional lead when I originally added the red rudder cap and placed the original flashing beacon inside. The loss of the upright red "jelly jar" is a few ounces.[[Image:strobe4.jpg|left|thumbnail|View of the new lead weight.]] </div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[Image:strobe2.jpg|left|thumbnail|]] [[Image:strobe3.jpg|right|thumbnail|Strobe with light shield.]]To rebalance the rudder I removed the original lead weight and fabricated a larger one that would still bolt into the existing location. This was done by making a mold out of aluminum foil and placing it in a large coffee can filled with sand to support the foil. I then melted the original lead and additional fishing weights in another can using a propane torch and poured it into my mold. I used more lead than I calculated cause its easier to cut it off then add it. I also had to drill two holes in it. The actual weight adjustment to just add the strobe vs standard light is not much. I used most of the additional lead when I originally added the red rudder cap and placed the original flashing beacon inside. The loss of the upright red "jelly jar" is a few ounces.[[Image:strobe4.jpg|left|thumbnail|View of the new lead weight.<ins style="font-weight: bold; text-decoration: none;">]][[Image:strobe5.jpg|right|thumbnail|</ins>]] </div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>I attached the power supply below the vertical in the area where the original flasher power supply was located.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>I attached the power supply below the vertical in the area where the original flasher power supply was located<ins style="font-weight: bold; text-decoration: none;">. The Whelen power supply does not have any legs or standoffs attached to it. The area where I wanted to mount it is not flat, it has a raised lip from the lightening hole. So I made some spacers to support the power supply yet raise it high enough to clear the lip and then bolted it down.[[Image:strobe6.jpg|left|thumbnail|Aluminum spacers to raise and support the power supply.]] I used the original power supply for the flasher to power the Whelen unit so no wires were run forward, just a new harness from the power supply to the strobe that come from Whelen</ins>.</div></td></tr>
<!-- diff cache key sbw_bondline:diff:1.41:old-2985:rev-2988:php=table -->
</table>Hortonjfhttps://bondline.org/index.php?title=Whelen_Strobe_install_inside_the_Red_Rudder_Cap&diff=2985&oldid=prevHortonjf at 17:49, 21 January 20092009-01-21T17:49:12Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw-interface="">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:49, 21 January 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l11">Line 11:</td>
<td colspan="2" class="diff-lineno">Line 11:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A bracket to mount the A 625 light will have to be fabricated as well as the HTS,CF power supply. I used the dimensions outlined on the sketch to make the bracket. As indicated a slot will have to be cut on the rear side of the bracket to allow the wiring harness to pass through. </div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A bracket to mount the A 625 light will have to be fabricated as well as the HTS,CF power supply. I used the dimensions outlined on the sketch to make the bracket. As indicated a slot will have to be cut on the rear side of the bracket to allow the wiring harness to pass through. </div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Additionally a light shield is fabricated and attached to the bracket to shield the strobe light from flashing forward and distracting the pilot. The bracket is attached to the rudder horn and the wires routed.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Additionally a light shield is fabricated and attached to the bracket to shield the strobe light from flashing forward and distracting the pilot. The bracket is attached to the rudder horn and the wires routed.</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[Image:strobe2.jpg|left|thumbnail|]] To rebalance the rudder I removed the original lead weight and fabricated a larger one that would still bolt into the existing location. This was done by making a mold out of aluminum foil and placing it in a large coffee can filled with sand to support the foil. I then melted the original lead and additional fishing weights in another can using a propane torch and poured it into my mold. I used more lead than I calculated cause its easier to cut it off then add it. I also had to drill two holes in it. The actual weight adjustment to just add the strobe vs standard light is not much. I used most of the additional lead when I originally added the red rudder cap and placed the original flashing beacon inside. The loss of the upright red "jelly jar" is a few ounces.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[Image:strobe2.jpg|left|thumbnail|<ins style="font-weight: bold; text-decoration: none;">]] [[Image:strobe3.jpg|right|thumbnail|Strobe with light shield.</ins>]]To rebalance the rudder I removed the original lead weight and fabricated a larger one that would still bolt into the existing location. This was done by making a mold out of aluminum foil and placing it in a large coffee can filled with sand to support the foil. I then melted the original lead and additional fishing weights in another can using a propane torch and poured it into my mold. I used more lead than I calculated cause its easier to cut it off then add it. I also had to drill two holes in it. The actual weight adjustment to just add the strobe vs standard light is not much. I used most of the additional lead when I originally added the red rudder cap and placed the original flashing beacon inside. The loss of the upright red "jelly jar" is a few ounces<ins style="font-weight: bold; text-decoration: none;">.[[Image:strobe4.jpg|left|thumbnail|View of the new lead weight.]] </ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">I attached the power supply below the vertical in the area where the original flasher power supply was located</ins>.</div></td></tr>
<!-- diff cache key sbw_bondline:diff:1.41:old-2982:rev-2985:php=table -->
</table>Hortonjfhttps://bondline.org/index.php?title=Whelen_Strobe_install_inside_the_Red_Rudder_Cap&diff=2982&oldid=prevHortonjf at 17:43, 21 January 20092009-01-21T17:43:43Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw-interface="">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:43, 21 January 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l11">Line 11:</td>
<td colspan="2" class="diff-lineno">Line 11:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A bracket to mount the A 625 light will have to be fabricated as well as the HTS,CF power supply. I used the dimensions outlined on the sketch to make the bracket. As indicated a slot will have to be cut on the rear side of the bracket to allow the wiring harness to pass through. </div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A bracket to mount the A 625 light will have to be fabricated as well as the HTS,CF power supply. I used the dimensions outlined on the sketch to make the bracket. As indicated a slot will have to be cut on the rear side of the bracket to allow the wiring harness to pass through. </div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Additionally a light shield is fabricated and attached to the bracket to shield the strobe light from flashing forward and distracting the pilot. The bracket is attached to the rudder horn and the wires routed.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Additionally a light shield is fabricated and attached to the bracket to shield the strobe light from flashing forward and distracting the pilot. The bracket is attached to the rudder horn and the wires routed.</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[Image:strobe2.jpg|left|thumbnail|]]</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[Image:strobe2.jpg|left|thumbnail|]] <ins style="font-weight: bold; text-decoration: none;">To rebalance the rudder I removed the original lead weight and fabricated a larger one that would still bolt into the existing location. This was done by making a mold out of aluminum foil and placing it in a large coffee can filled with sand to support the foil. I then melted the original lead and additional fishing weights in another can using a propane torch and poured it into my mold. I used more lead than I calculated cause its easier to cut it off then add it. I also had to drill two holes in it. The actual weight adjustment to just add the strobe vs standard light is not much. I used most of the additional lead when I originally added the red rudder cap and placed the original flashing beacon inside. The loss of the upright red "jelly jar" is a few ounces.</ins></div></td></tr>
<!-- diff cache key sbw_bondline:diff:1.41:old-2981:rev-2982:php=table -->
</table>Hortonjfhttps://bondline.org/index.php?title=Whelen_Strobe_install_inside_the_Red_Rudder_Cap&diff=2981&oldid=prevHortonjf at 17:34, 21 January 20092009-01-21T17:34:25Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw-interface="">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:34, 21 January 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l8">Line 8:</td>
<td colspan="2" class="diff-lineno">Line 8:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The install is straight forward however the rudder will need to be rebalanced. The Maintenance Manual covers this well. </div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The install is straight forward however the rudder will need to be rebalanced. The Maintenance Manual covers this well. </div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div> </div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[[Image:strobe0.jpg|left|thumbnail|Rough dimensional sketch.]][[Image:strobe1.jpg|right|thumbnail|The original bracket for the standard bulb and the new one for the whelen strobe, note light shield.]]</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A bracket to mount the A 625 light will have to be fabricated as well as the HTS,CF power supply. I used the dimensions outlined on the sketch to make the bracket. As indicated a slot will have to be cut on the rear side of the bracket to allow the wiring harness to pass through. </div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A bracket to mount the A 625 light will have to be fabricated as well as the HTS,CF power supply. I used the dimensions outlined on the sketch to make the bracket. As indicated a slot will have to be cut on the rear side of the bracket to allow the wiring harness to pass through. </div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">[[Image:strobe0.jpg|left|thumbnail|Rough dimensional sketch.]] [[Image:strobe1.jpg|left|thumbnail|The original bracket for the standard bulb and the new one for the whelen strobe, note light shield.]]</del>Additionally a light shield is fabricated and attached to the bracket to shield the strobe light from flashing forward and distracting the pilot. The bracket is attached to the rudder horn and the wires routed.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Additionally a light shield is fabricated and attached to the bracket to shield the strobe light from flashing forward and distracting the pilot. The bracket is attached to the rudder horn and the wires routed.</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[[Image:strobe2.jpg|left|thumbnail|]]</ins></div></td></tr>
<!-- diff cache key sbw_bondline:diff:1.41:old-2979:rev-2981:php=table -->
</table>Hortonjf