https://bondline.org/index.php?action=history&feed=atom&title=Installing_Mitchell_Gauges 2026-11-11T01:36:51Z Revision history for this page on the wiki MediaWiki 1.46.2 https://bondline.org/index.php?title=Installing_Mitchell_Gauges&diff=2218&oldid=prev 2006-08-24T05:24:19Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw-interface=""> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 05:24, 24 August 2006</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l29">Line 29:</td> <td colspan="2" class="diff-lineno">Line 29:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]      [[Image:mounted-stack-B.jpg]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]      [[Image:mounted-stack-B.jpg]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Looks good with the overlay.  I used 1/16 black rubber tape as a temporary measure to fill the gap in the old plastic overlay... a metal one is coming in the future to match a future Fred K. metal overlay on the left side. The new metal overlay can be flat since does not need to hold the plexi gauge cover in place any more.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Looks good with the overlay.  I used 1/16 black rubber tape as a temporary measure to fill the gap in the old plastic overlay... a metal one is coming in the future to match a future Fred K. metal overlay on the left side. The new metal overlay can be flat since does not need to hold the plexi gauge cover in place any more<ins style="font-weight: bold; text-decoration: none;">.  Yes - the two breakers did get labelled</ins>.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the sensors ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the sensors ==</div></td></tr> <!-- diff cache key sbw_bondline:diff:1.41:old-2186:rev-2218:php=table --> </table>

Az gila https://bondline.org/index.php?title=Installing_Mitchell_Gauges&diff=2186&oldid=prev 2006-06-21T14:59:22Z

<p><span class="autocomment">Mounting the sensors</span></p> <table style="background-color: #fff; color: #202122;" data-mw-interface=""> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 14:59, 21 June 2006</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l33">Line 33:</td> <td colspan="2" class="diff-lineno">Line 33:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the sensors ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the sensors ==</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The oil pressure sensor mounts on the upper right motor mount tube, just ahead of the voltage regulator.  This picture shows the mount with 18 inches of -4 hose... a few inches less probably would be better. Note the non-insulated clamp to pick up the sensor ground return.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The oil pressure sensor mounts on the upper right motor mount tube, just ahead of the voltage regulator.  This picture shows the mount with 18 inches of -4 hose... a few inches less probably would be better. Note the non-insulated clamp to pick up the sensor ground return<ins style="font-weight: bold; text-decoration: none;">. A separate ground wire is connected to a ring terminal on the screw connecting the two clamps</ins>.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:oil-sensor-A.JPG]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:oil-sensor-A.JPG]]</div></td></tr> <!-- diff cache key sbw_bondline:diff:1.41:old-1992:rev-2186:php=table --> </table>

Az gila https://bondline.org/index.php?title=Installing_Mitchell_Gauges&diff=1992&oldid=prev 2006-03-05T17:16:49Z

<p><span class="autocomment">Mounting the stack</span></p> <table style="background-color: #fff; color: #202122;" data-mw-interface=""> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:16, 5 March 2006</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l25">Line 25:</td> <td colspan="2" class="diff-lineno">Line 25:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the stack ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the stack ==</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>I elected to mount the Mitchell stack with #6 flush head screws on each side, and a round head #6 on the top.  The round head screw will pass through the overlay - plastic or future metal.  I centered it in the existing gap, and made the top flush with the factory hole.  This gave me room under it for the two breakers mentioned earlier. You can also see the 1/8 aluminum plate, tapped for 2 #6 flush mounting screws that holds the ammeter shunt - it's mounted behind the triangular factory cut-out - this makes easy routing for the #8 power wires from the battery that connected to the back of the old ammeter.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>I elected to mount the Mitchell stack with #6 flush head screws on each side, and a round head #6 on the top.  The round head screw will pass through the overlay - plastic or future metal <ins style="font-weight: bold; text-decoration: none;">- and help hold it down</ins>.  I centered it in the existing gap, and made the top flush with the factory hole.  This gave me room under it for the two breakers mentioned earlier. You can also see the 1/8 aluminum plate, tapped for 2 #6 flush mounting screws that holds the ammeter shunt - it's mounted behind the triangular factory cut-out - this makes easy routing for the #8 power wires from the battery that connected to the back of the old ammeter.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]      [[Image:mounted-stack-B.jpg]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]      [[Image:mounted-stack-B.jpg]]</div></td></tr> <!-- diff cache key sbw_bondline:diff:1.41:old-1930:rev-1992:php=table --> </table>

Az gila https://bondline.org/index.php?title=Installing_Mitchell_Gauges&diff=1930&oldid=prev 2006-02-27T05:18:02Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw-interface=""> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 05:18, 27 February 2006</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l37">Line 37:</td> <td colspan="2" class="diff-lineno">Line 37:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:oil-sensor-A.JPG]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:oil-sensor-A.JPG]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The fuel pressure sensor is mounted on the upper left motor mount near the electric fuel pump.  The 10.5 inch hose works here.  The STC calls for a mount on the lower engine mount tube, but the hose routed better this way.  Note the cap on the AN fitting that was the original pass through the fire wall.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The fuel pressure sensor is mounted on the upper left motor mount near the electric fuel pump.  The 10.5 inch hose works here.  The STC calls for a mount on the lower engine mount tube, but the hose routed better this way.  Note the <ins style="font-weight: bold; text-decoration: none;">AN929-4D </ins>cap on the AN fitting that was the original pass through the fire wall.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:fuel-sensor-A.JPG]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:fuel-sensor-A.JPG]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>(More to come.)</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>(More to come.)</div></td></tr> <!-- diff cache key sbw_bondline:diff:1.41:old-1929:rev-1930:php=table --> </table>

Az gila https://bondline.org/index.php?title=Installing_Mitchell_Gauges&diff=1929&oldid=prev 2006-02-27T05:16:50Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw-interface=""> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 05:16, 27 February 2006</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l30">Line 30:</td> <td colspan="2" class="diff-lineno">Line 30:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Looks good with the overlay.  I used 1/16 black rubber tape as a temporary measure to fill the gap in the old plastic overlay... a metal one is coming in the future to match a future Fred K. metal overlay on the left side. The new metal overlay can be flat since does not need to hold the plexi gauge cover in place any more.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Looks good with the overlay.  I used 1/16 black rubber tape as a temporary measure to fill the gap in the old plastic overlay... a metal one is coming in the future to match a future Fred K. metal overlay on the left side. The new metal overlay can be flat since does not need to hold the plexi gauge cover in place any more.</div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">== Mounting the sensors ==</ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">The oil pressure sensor mounts on the upper right motor mount tube, just ahead of the voltage regulator.  This picture shows the mount with 18 inches of -4 hose... a few inches less probably would be better. Note the non-insulated clamp to pick up the sensor ground return.</ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[[Image:oil-sensor-A.JPG]]</ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">The fuel pressure sensor is mounted on the upper left motor mount near the electric fuel pump.  The 10.5 inch hose works here.  The STC calls for a mount on the lower engine mount tube, but the hose routed better this way.  Note the cap on the AN fitting that was the original pass through the fire wall.</ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[[Image:fuel-sensor-A.JPG]]</ins></div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>(More to come.)</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>(More to come.)</div></td></tr> <!-- diff cache key sbw_bondline:diff:1.41:old-1924:rev-1929:php=table --> </table>

Az gila https://bondline.org/index.php?title=Installing_Mitchell_Gauges&diff=1924&oldid=prev 2006-02-27T04:49:51Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw-interface=""> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 04:49, 27 February 2006</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l27">Line 27:</td> <td colspan="2" class="diff-lineno">Line 27:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>I elected to mount the Mitchell stack with #6 flush head screws on each side, and a round head #6 on the top.  The round head screw will pass through the overlay - plastic or future metal.  I centered it in the existing gap, and made the top flush with the factory hole.  This gave me room under it for the two breakers mentioned earlier. You can also see the 1/8 aluminum plate, tapped for 2 #6 flush mounting screws that holds the ammeter shunt - it&#039;s mounted behind the triangular factory cut-out - this makes easy routing for the #8 power wires from the battery that connected to the back of the old ammeter.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>I elected to mount the Mitchell stack with #6 flush head screws on each side, and a round head #6 on the top.  The round head screw will pass through the overlay - plastic or future metal.  I centered it in the existing gap, and made the top flush with the factory hole.  This gave me room under it for the two breakers mentioned earlier. You can also see the 1/8 aluminum plate, tapped for 2 #6 flush mounting screws that holds the ammeter shunt - it&#039;s mounted behind the triangular factory cut-out - this makes easy routing for the #8 power wires from the battery that connected to the back of the old ammeter.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]      [[Image:mounted-stack-<del style="font-weight: bold; text-decoration: none;">A</del>.jpg]]</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]      [[Image:mounted-stack-<ins style="font-weight: bold; text-decoration: none;">B</ins>.jpg]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Looks good with the overlay.  I used 1/16 black rubber tape as a temporary measure to fill the gap in the old plastic overlay... a metal one is coming in the future to match a future Fred K. metal overlay on the left side. The new metal overlay can be flat since does not need to hold the plexi gauge cover in place any more.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Looks good with the overlay.  I used 1/16 black rubber tape as a temporary measure to fill the gap in the old plastic overlay... a metal one is coming in the future to match a future Fred K. metal overlay on the left side. The new metal overlay can be flat since does not need to hold the plexi gauge cover in place any more.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>(More to come.)</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>(More to come.)</div></td></tr> <!-- diff cache key sbw_bondline:diff:1.41:old-1922:rev-1924:php=table --> </table>

Az gila https://bondline.org/index.php?title=Installing_Mitchell_Gauges&diff=1922&oldid=prev 2006-02-27T04:44:32Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw-interface=""> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 04:44, 27 February 2006</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l27">Line 27:</td> <td colspan="2" class="diff-lineno">Line 27:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>I elected to mount the Mitchell stack with #6 flush head screws on each side, and a round head #6 on the top.  The round head screw will pass through the overlay - plastic or future metal.  I centered it in the existing gap, and made the top flush with the factory hole.  This gave me room under it for the two breakers mentioned earlier. You can also see the 1/8 aluminum plate, tapped for 2 #6 flush mounting screws that holds the ammeter shunt - it&#039;s mounted behind the triangular factory cut-out - this makes easy routing for the #8 power wires from the battery that connected to the back of the old ammeter.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>I elected to mount the Mitchell stack with #6 flush head screws on each side, and a round head #6 on the top.  The round head screw will pass through the overlay - plastic or future metal.  I centered it in the existing gap, and made the top flush with the factory hole.  This gave me room under it for the two breakers mentioned earlier. You can also see the 1/8 aluminum plate, tapped for 2 #6 flush mounting screws that holds the ammeter shunt - it&#039;s mounted behind the triangular factory cut-out - this makes easy routing for the #8 power wires from the battery that connected to the back of the old ammeter.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay<ins style="font-weight: bold; text-decoration: none;">-A.jpg]]      [[Image:mounted-stack</ins>-A.jpg]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Looks good with the overlay.  I used 1/16 black rubber tape as a temporary measure to fill the gap in the old plastic overlay... a metal one is coming in the future to match a future Fred K. metal overlay on the left side. The new metal overlay can be flat since does not need to hold the plexi gauge cover in place any more.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Looks good with the overlay.  I used 1/16 black rubber tape as a temporary measure to fill the gap in the old plastic overlay... a metal one is coming in the future to match a future Fred K. metal overlay on the left side. The new metal overlay can be flat since does not need to hold the plexi gauge cover in place any more.</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2" class="diff-side-added"></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">[[Image:mounted-stack-A.jpg]]</del></div></td><td colspan="2" class="diff-side-added"></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>(More to come.)</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>(More to come.)</div></td></tr> <!-- diff cache key sbw_bondline:diff:1.41:old-1921:rev-1922:php=table --> </table>

Az gila https://bondline.org/index.php?title=Installing_Mitchell_Gauges&diff=1921&oldid=prev 2006-02-27T04:43:15Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw-interface=""> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 04:43, 27 February 2006</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l25">Line 25:</td> <td colspan="2" class="diff-lineno">Line 25:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the stack ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the stack ==</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>I elected to mount the Mitchell stack with #6 flush head screws on each side, and a round head #6 on the top.  The round head screw will pass through the overlay - plastic or future metal.  I centered it in the existing gap, and made the top flush with the factory hole.  This gave me room under it for the two breakers mentioned earlier. You can also see the 1/8 aluminum plate, tapped for 2 #6 flush mounting screws that holds the ammeter shunt - it's mounted behind the triangular factory cut-out - this makes easy routing for the #8 power wires from the battery.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>I elected to mount the Mitchell stack with #6 flush head screws on each side, and a round head #6 on the top.  The round head screw will pass through the overlay - plastic or future metal.  I centered it in the existing gap, and made the top flush with the factory hole.  This gave me room under it for the two breakers mentioned earlier. You can also see the 1/8 aluminum plate, tapped for 2 #6 flush mounting screws that holds the ammeter shunt - it's mounted behind the triangular factory cut-out - this makes easy routing for the #8 power wires from the battery <ins style="font-weight: bold; text-decoration: none;">that connected to the back of the old ammeter</ins>.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]</div></td></tr> <!-- diff cache key sbw_bondline:diff:1.41:old-1920:rev-1921:php=table --> </table>

Az gila https://bondline.org/index.php?title=Installing_Mitchell_Gauges&diff=1920&oldid=prev 2006-02-27T04:01:46Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw-interface=""> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 04:01, 27 February 2006</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l21">Line 21:</td> <td colspan="2" class="diff-lineno">Line 21:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>When this package wiring is completed, you should have ends for - two red wires to the ammeter shunt - two ground wires, meter ground and lights ground - a lighting power connection - a hot 12 volt connection (direct to bus, not through an Avionics switch), fused or breakered - and finally three sensor wires.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>When this package wiring is completed, you should have ends for - two red wires to the ammeter shunt - two ground wires, meter ground and lights ground - a lighting power connection - a hot 12 volt connection (direct to bus, not through an Avionics switch), fused or breakered - and finally three sensor wires.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>I chose to get power from a new 1 Amp breaker, since I had to add one for the Horizon tachometer I am adding at the same time. It was easy to just make it two new breakers.  I placed them side by side under the new instrument stack. The STC says to use the power wire that was connected to the original instruments - via the fuse shared with the <del style="font-weight: bold; text-decoration: none;">strobes</del>.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>I chose to get power from a new 1 Amp breaker, since I had to add one for the Horizon tachometer I am adding at the same time. It was easy to just make it two new breakers.  I placed them side by side under the new instrument stack. The STC says to use the power wire that was connected to the original instruments - via the fuse shared with the <ins style="font-weight: bold; text-decoration: none;">stall warning horn</ins>.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the stack ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the stack ==</div></td></tr> <!-- diff cache key sbw_bondline:diff:1.41:old-1919:rev-1920:php=table --> </table>

Az gila https://bondline.org/index.php?title=Installing_Mitchell_Gauges&diff=1919&oldid=prev 2006-02-27T04:00:31Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw-interface=""> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 04:00, 27 February 2006</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l25">Line 25:</td> <td colspan="2" class="diff-lineno">Line 25:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the stack ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Mounting the stack ==</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>I elected to mount the Mitchell stack with #6 flush head screws on each side, and a round head #6 on the top.  The <del style="font-weight: bold; text-decoration: none;">rounf </del>head screw will pass through the overlay - plastic or future metal.  I centered it in the existing gap, and made the top flush with the factory hole.  This gave me room under it for the two breakers mentioned earlier. You can also see the 1/8 aluminum plate, tapped for 2 #6 flush <del style="font-weight: bold; text-decoration: none;">mouting </del>screws that holds the ammeter shunt - it's mounted behind the triangular factory cut-out - this makes easy routing for the #8 power wires from the battery.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>I elected to mount the Mitchell stack with #6 flush head screws on each side, and a round head #6 on the top.  The <ins style="font-weight: bold; text-decoration: none;">round </ins>head screw will pass through the overlay - plastic or future metal.  I centered it in the existing gap, and made the top flush with the factory hole.  This gave me room under it for the two breakers mentioned earlier. You can also see the 1/8 aluminum plate, tapped for 2 #6 flush <ins style="font-weight: bold; text-decoration: none;">mounting </ins>screws that holds the ammeter shunt - it's mounted behind the triangular factory cut-out - this makes easy routing for the #8 power wires from the battery.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-no-overlay-A.jpg]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Looks good with the overlay.  I used 1/16 black rubber tape as a <del style="font-weight: bold; text-decoration: none;">temorary </del>measure to fill the gap in the old plastic overlay... a metal one is coming in the future to match a future Fred K. metal overlay on the left side. The new metal overlay can be flat since does not need to hold the plexi gauge cover in place any more.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Looks good with the overlay.  I used 1/16 black rubber tape as a <ins style="font-weight: bold; text-decoration: none;">temporary </ins>measure to fill the gap in the old plastic overlay... a metal one is coming in the future to match a future Fred K. metal overlay on the left side. The new metal overlay can be flat since does not need to hold the plexi gauge cover in place any more.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-stack-A.jpg]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:mounted-stack-A.jpg]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>(More to come.)</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>(More to come.)</div></td></tr> <!-- diff cache key sbw_bondline:diff:1.41:old-1918:rev-1919:php=table --> </table>

Az gila